Pro/Forums - View Single Post - BI Mini & BIX enough for my amd and 9700?

BrianH · 10-07-2002, 10:29 PM

Might want to go this route

Res
Pump
Maze3
BIX
Radeon
BIMini
Res

The reason for this setup is to the the BIX to remove the heat from the CPU. The AMD CPU generates the most heat and, therefore, needs the bigger rad. The Radeon, while still hot, should be colled enough by the BIMini.

I would also recommend a stronger pump, in the 350 ~ 400 pgh range.

Also, the BIMini has 3/8" connectors. This might reduce you flow quite a bit. It will, at the very less, increase the speed and pressure within the BIMini

Hope this helps

10-07-2002, 10:29 PM	#2
BrianH Cooling Savant Join Date: May 2002 Location: Ottawa, Ont, Canada Posts: 115	Might want to go this route Res Pump Maze3 BIX Radeon BIMini Res The reason for this setup is to the the BIX to remove the heat from the CPU. The AMD CPU generates the most heat and, therefore, needs the bigger rad. The Radeon, while still hot, should be colled enough by the BIMini. I would also recommend a stronger pump, in the 350 ~ 400 pgh range. Also, the BIMini has 3/8" connectors. This might reduce you flow quite a bit. It will, at the very less, increase the speed and pressure within the BIMini Hope this helps