Pro/Forums - View Single Post

Nordic · 12-19-2001, 04:37 AM

I bought an XP 1500 (1.33GHz) and it is working great at 1575 MHz with default voltage (1.75V). It posted at 1650 MHz but was a little unstable, my radiator is too small so I have to stay away from raising the voltage but I will take care of that soon.

I have a 150x100x20 mm low pressure drop radiator and intend to replace it with a DangerDen Cube. The temp reading of the in-socket probe under load is 40 C using a 92 mm Papst fan (35 cfm, and it's very quiet). That's 18-19 C over ambient with a really small radiator, it's excellent. But the temps climb fast when I raise speed/voltage.

12-19-2001, 04:37 AM	#2
Nordic Cooling Neophyte Join Date: Mar 2001 Location: Umeå, Sweden Posts: 98	I bought an XP 1500 (1.33GHz) and it is working great at 1575 MHz with default voltage (1.75V). It posted at 1650 MHz but was a little unstable, my radiator is too small so I have to stay away from raising the voltage but I will take care of that soon. I have a 150x100x20 mm low pressure drop radiator and intend to replace it with a DangerDen Cube. The temp reading of the in-socket probe under load is 40 C using a 92 mm Papst fan (35 cfm, and it's very quiet). That's 18-19 C over ambient with a really small radiator, it's excellent. But the temps climb fast when I raise speed/voltage. __________________ Pump:Eheim 1048, Radiator:LPD radiator 100x150x20mm, CPU block:DD Maze-2, GPU block: DD GPU block, Chipset block:Zalman NB32 AMD XP 1500+, EpoX 8K7A, PoV GF3Ti200 Pic of my YY-cube