define series 1, 2, & 3; is that the vcore ? (C, D, & E)
so the load temps dropped at 3/E ???
look at the air/water differential - ?? (should be increasing as the load increases)
2.2, 4.2, 3.0 ????
at the same flow rate, with the same die size, the C/W will be the same at all power levels
(hundreds of tests this way; if your's are not, there is an error)
what is "Ambient load Temp" ? = air temp under load ?
Water the same ?
you have too many uncontrolled variables
-> unless you REALLY like multivariant analysis (which I do NOT)
and you'll need a LOT of data points
|