Pro/Forums - View Single Post - remember that old nag i was trying to convert?

g.l.amour · 10-22-2002, 09:53 AM

some more pics for the ones interested

this one shows the speakercable going to
a) ccmos sw
b) 5V molex pwr source

the green/white/red cable goes on all the ccmos jumper positions
black one is temp probe for ti500
black/red/blue is pwr source for ti500 fan

here u can also see the original 5V molex being splitted at the destination to plexi fan, and ti500 cooler, means only 1 cable going to molex

here's my cheapass custom sound dampening, works great for 0$

here's full view of the other compartment, needs some cleaning up...

10-22-2002, 09:53 AM	#12
g.l.amour Cooling Savant Join Date: Mar 2002 Location: on da case Posts: 933	some more pics for the ones interested this one shows the speakercable going to a) ccmos sw b) 5V molex pwr source the green/white/red cable goes on all the ccmos jumper positions black one is temp probe for ti500 black/red/blue is pwr source for ti500 fan here u can also see the original 5V molex being splitted at the destination to plexi fan, and ti500 cooler, means only 1 cable going to molex here's my cheapass custom sound dampening, works great for 0$ here's full view of the other compartment, needs some cleaning up...