Quote:
Originally posted by MadDogMe
I was thinking of doing a 'reset' button mod to my C~Mos  , the recessed push kind, but they're only two pin that I can find...
PS, heard a tip the other day about putting a spring inside tube and plonking it in a pan of boiling water for a while, then hold it to desired shape and stick it in a sink of cool water  ...
Don't know where you'd find a suitable spring to hold the tubes shape open though...
|
Try using a Turbo switch from an old AT box. They're like an AT switch always on or off which ever position they're in. So it should work for a CMOS clear switch. I learned that one by trying to use it as an ATX power switch, it would just turn on the computer for 4 seconds and turn it off again.
