Well, one motherboard, and a cracked leaking res. later my system is finally up and running. I have no temps yet as Im just glad to see it boots and runs for a change!!!:P Anyways, before going further, I want to tag down the way the system is going to be filled and drained.
The way I want to do the draining is using 2 2way ball valves (3 way valves are EXPENSIVE). Id stop the system and pump, switch the system valve off and the drain valve on, then turn the pump back on to flush the system. Now the pump has dry cutoff,but Im still worried this going to potentially harm my pump...
What do you guys think?
|