Pro/Forums - View Single Post

icel0rd · 10-24-2002, 09:49 PM

http://forums.procooling.com/vbb/sho...rattling+eheim

I found it on the forum. I performed the pump surgery about an hour ago with a lighter and some crazyglue. I crazyglued the neck closest to the magnet that the shaft feeds through that was able to turn most of the way around before the impeller would lock and turn as a whole. I melted the impeller's end to lock with the piece underneath and also applied a little crazy glue to it as an insurance policy.

My pump is totally silent now.

-Ice-

10-24-2002, 09:49 PM	#27
icel0rd Cooling Savant Join Date: Jan 2002 Location: Where even the devil wont go Posts: 103	http://forums.procooling.com/vbb/sho...rattling+eheim I found it on the forum. I performed the pump surgery about an hour ago with a lighter and some crazyglue. I crazyglued the neck closest to the magnet that the shaft feeds through that was able to turn most of the way around before the impeller would lock and turn as a whole. I melted the impeller's end to lock with the piece underneath and also applied a little crazy glue to it as an insurance policy. My pump is totally silent now. -Ice- __________________ Redhat 8 Gigabyte GA-7dpxdw+ w/dual modded AXP 1800+ CPUs running at AXP 2000+ speed 1 512 meg crucial ECC DDR 2100 1 512 meg Infineon PC2700 Sblive Value Geforce 4 Ti4600 Deskstar 60 gig drive (1)K4.1 waterblock (.5" barbs) (1) Maze 3 waterblock (.5" barbs) Black Ice Rad TopFin 250gph pump 1/2" OD Vinyl hose (yep, vinyl)