Pro/Forums - View Single Post - 1U/MicroATX Case -- WaterCooling!!

koslov · 10-26-2002, 02:37 PM

Well, since not one NF2 is readily available yet, it's still rumor, but here's some info I dug up:

Biostar
M7NCG
NVIDIA Crush18 chipset, micro ATX, Socket A, dual channel DDR400 support, int. GF4 MX graphics, AGP 8X support, ATA133 support, 3 PCI, 1 CNR, 2 DDR DIMM slots, 6 USB 2.0 ports, optional - LAN (RTL8201BL). Samples - September, mass production - October

Chaintech
7NIF1
NVIDIA Crush18, micro ATX, Socket A, dual channel DDR333, int. graphics, AGP 8X, USB2.0, ATA133, PHY LAN, IEEE 1394, CMedia 8738 + AC'97 codec, 3 PCI, 3 DDR DIMM slots

FIC D33007- MicroATX type of IGP+MCP2

And Shuttle will be making a TINY NF2, but probably only for their SFF barebones.

10-26-2002, 02:37 PM	#18
koslov Cooling Savant Join Date: Jul 2002 Location: Posts: 264	Well, since not one NF2 is readily available yet, it's still rumor, but here's some info I dug up: Biostar M7NCG NVIDIA Crush18 chipset, micro ATX, Socket A, dual channel DDR400 support, int. GF4 MX graphics, AGP 8X support, ATA133 support, 3 PCI, 1 CNR, 2 DDR DIMM slots, 6 USB 2.0 ports, optional - LAN (RTL8201BL). Samples - September, mass production - October Chaintech 7NIF1 NVIDIA Crush18, micro ATX, Socket A, dual channel DDR333, int. graphics, AGP 8X, USB2.0, ATA133, PHY LAN, IEEE 1394, CMedia 8738 + AC'97 codec, 3 PCI, 3 DDR DIMM slots FIC D33007- MicroATX type of IGP+MCP2 And Shuttle will be making a TINY NF2, but probably only for their SFF barebones.