Pro/Forums - View Single Post

PolakATL · 10-26-2002, 06:22 PM

The Swiftech is up and running with a monsterous lytron Cu rad and 2 10in fans. my temps at 185fsb@1.75v are as follows:

IT-7temp:
load:26c
idle:2c

Probe on the socket:
load:14.3c
idle:-11c

keep in mind i'm cooling r9700 with the same water and running Via Aqua1300 through a 20in x 11in rad!!! there is almost no flow.

3.15ghz out of a 2.26 BABY!!! it would boot as high as 3.4 but blue screen on XP.

10-26-2002, 06:22 PM	#1
PolakATL Cooling Neophyte Join Date: Oct 2002 Location: The ATL Posts: 20	My Swifty Pelt setup and running The Swiftech is up and running with a monsterous lytron Cu rad and 2 10in fans. my temps at 185fsb@1.75v are as follows: IT-7temp: load:26c idle:2c Probe on the socket: load:14.3c idle:-11c keep in mind i'm cooling r9700 with the same water and running Via Aqua1300 through a 20in x 11in rad!!! there is almost no flow. 3.15ghz out of a 2.26 BABY!!! it would boot as high as 3.4 but blue screen on XP. __________________ ABIT IT-7 MAX P4 2.26B@3.01 1.7v 180fsb Corsair (samsung) PC3200 C2 Radeon 9700Pro 3Dmark2k 16606 (384/350) http://service.madonion.com/compare?2k1=4474405 60gig WD7200 H20> Maze 3, heater core, GeF4 on ATI, Via Aqua1300 Last edited by PolakATL; 10-27-2002 at 04:59 PM.