Pro/Forums - View Single Post - Soc A WB Clamp Device (non 4 hole type) Links

bigben2k · 10-29-2002, 09:31 AM

Welcome to ProCooling!

I'm in the process of designing a waterblock, and I've examined this pretty closely.

Out of the five mounts you listed, the last one does not fully meet AMD specs, and I'm sorry that it had to come from this very site! As per AMD specs, the clamping force should be applied longitudinaly over the core, and not be off-center by more than 1.5 mm.

I really like the third one, from DangerDen (but it's still out of spec).

10-29-2002, 09:31 AM	#2
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	Welcome to ProCooling! I'm in the process of designing a waterblock, and I've examined this pretty closely. Out of the five mounts you listed, the last one does not fully meet AMD specs, and I'm sorry that it had to come from this very site! As per AMD specs, the clamping force should be applied longitudinaly over the core, and not be off-center by more than 1.5 mm. I really like the third one, from DangerDen (but it's still out of spec). __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 10-29-2002 at 10:18 AM.