P4 Mounting / Hold-down
I'm curious what other people have done with their blocks to get them P4 mounted. I'm toying with the idea of using the retail heatsink hold down device on a waterblock - but was also curious about how the mobo holes hold up. Just asking for advice from the experienced - thanks!
__________________
"mooooo" said the cow.
ERTW - UBC
P4 2.4B @3.01Ghz 167FSB :: Abit IC7 :: 2x256MB HyperX PC3700 :: ASUS 9600XT :: WD Raptor 2x36GB RAID0
|