View Single Post
Unread 11-06-2002, 01:34 AM   #12
Skulemate
Cooling Savant
 
Skulemate's Avatar
 
Join Date: Jul 2002
Location: Toronto, Canada
Posts: 381
Default

I did a quick Google on "Kuri Tec K010", and found the page for this make of tubing at http://www.kuriyama.com (it's on their literature page). One thing that I noticed that was of interest was the hardness of this tubing... it was given as 73 +/- 3 on the Shore A scale. Unfortunately this means that the tubing is quite hard compared to Tygon or Clearflex, which have hardness values of around 55-57. I agree that you'll be able to make this work, but it doesn't appear to be much more than your typical thickwall PVC. Sorry.
__________________
Michael E. Robbins
M.A.Sc. Candidate, University of Toronto

12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs
SETI BOINC: Dual Opteron 246s (Iwill DK8N) | XP2800+ (Shuttle SN41G2) | 3x XP2400+ (ASUS A7N266-vm)
SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) | Crunching 24/7
Skulemate is offline   Reply With Quote