Quote:
Originally posted by FRAGN'STIEN
Hey kai. I wouldn't worry about it the pumps fine. That nut is a compression type fitting for certain hose. You don't even need that. I have an Eheim 1048 and had a leak right where your talking about. Go to Home depot, or the like, and ask for "teflon tape". If you don't know what it is it's a thin white (non sticky) tape to go on threads to stop water, gas from leaking through the threads. If you do know what it is ignore the last part.
|
its not the compression fitting i took that off , its the one small nut thats right ontop of the pump body and at the bottom of the outlet , further inspection determined that it was what slealed the outlet barbs into the pump , i think it came loose just from the hose pulling on it. If i take it out im going to take the stock barbs off and stick some poly 1/2 in there.