The Access 2000 .mdb file is located at a temporary FTP. The address is
ftp://12.18.239.202/heatercore.mdb
This is really easy to use ... I wrote it to be so simple and engineering student can use it (it is pretty unf*ckable, considering how much time was spent on it), as long as you STAY OUT OF THE MENUS UP TOP EXCEPT TO OPEN AND CLOSE THE DBASE!!!
When you open it, you will get a window that prompts you for L/W/D measurements, the Input Hose size, and +/- figures for the L/W/Ds. This is all in inches. If you leave a blank at "0", it is considered a wildcard (input hose must have a value or you will get NOTHING). If all blanks are "0", you will get nothing, because that is stupid. If you enter measurements and there are no returns in the next dialog, then there are no heatercores that are near those measurements. Change your values or increase the scope in the +/- field. I didn't include pictures because I am to F*CKING LAZY, so please don't ask. Go to
www.heatercore4u.com , andd a slash, and type in the model # +.htm to get the page for that particular model. There's your picture.
Once you have a list of heater cores, if you want to zoom in on one and get the vehicles that it fits on, click on the record selector on the left side of the window, and push the button up top. It'll pop up another dialog that lists the vehicles that sucker fits on so you can go down to NAPA and get yourself one.
If you have any suggestions, PM me and I'll tweak it a bit (do NOT ask me to add pictures because I am too F*CKING LAZY ... go to the web site yourself ... bwahahahaha!). I spent probably 8 hours on it, so any gifts of beer and stuff you guys want to send would be appreciated.
Oh, and if somebody wants to host this here on procooling (HEY PRO/MODS!!!), please do before my company notices their virtual pants are down.