If you want an easy 2Ghz, wait until next month when you can buy an 1800+ (same as yours) TbredB for $80-90 that you can watercool to 2.1Ghz. If you aren't experienced in watercooling, peltier use is a dangerous road to go down. Get a good WC setup going for a few months and do a ton of research ... then see if you still want to go through the pelt hassle.
Alternatively, if you haven't bought anything for a WC/Pelt setup yet, look at a Prometia. It'll cost more than the WC/Pelt combined, but you'll get your 2Ghz.
Also, look into Volt Mods for your board. On an old 1800+ stepping (they sucked), you'll need some V going through it to get that high, and that will involve some serious cooling. You'd really be better off with even a TbredA than that.
(If you bought your proc within the last four months that may not apply).
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|