I wonder if I've messed up my block?? Several months ago I purchased a Maze2 and a GrundFos very high output pump and a F150 heater core. It sat around with distilled water and a tiny bit of Redline Water Wetter (but not likely enough) in it for several months before I got the project back going. Installed on an Iwill KK266 with an Athlon 1200 I am getting CPU temps of 45C running Prime95. My water temp never exceeds 28C in the hottest part of the system. Is it corrosion in the block, or is getting the contact patch correct on the cpu the most likely problem???
|