Curious booting problem
Hi all!
Well, I've had my computer watercooled for about 3 months now and it's been working out pretty well. However, just recently (this week) I've had some very strange booting problems. Sometimes my computer will boot fine. Other times its a no go (it hangs at CPU recognition, right before the memory test is done).
I have:
Gigabyte 7DPXDW mobo
2x AMD MP 2000+ w/ TC-4 waterblocks
512MB Registered RAM
Black Ice Extreme
Eheim 1250 pump
Homemade res
other crap not really important
Anyways, the hang occurs when the mobo recognizes 1 CPU but not the other. I've tried fiddling with the waterblocks (tightening and loosening) but it still acts up. Right now it's okay (I did a burn in test for 1.5 hours and it ran fine), but I have no idea if it will boot tomorrow.
Any thoughts? All comments are appreciated. Thanks!
__________________
Pentium 4 3.06 GHz watercooled by Koolance EXOS
Gigabyte 8INXP mobo
512MB Corsair PC3200 DDR RAM
Fortron 400W PSU
Watercooled Radeon 9700 Pro
Quiet as a mouse!
Koolance Temps: 26C/32C
BIOS Temps: 36C/44C
==========================
Dual Athlon MP 2000+ watercooled
Black Ice Extreme, Eheim 1250 pump, 2 DTek TC-4 blocks, and homemade res
Gigabyte GA-7DPWDX mobo
512 MB Registered Mushkin DDR 2100 RAM
RAID 0: 2 IBM 60 GXP 60GB ea
RAID 5: 3 Western Digital Caviar 60GB ea
MSI GeForce4 4400
Sound Blaster Audigy MP3+
Yamaha CDRW-F1
Adaptec ATA RAID 2100 card
LOADS OF FANS!!!!
|