Hi all!
Thanks for the replies! I finally was able to get my computer to boot! What I did was crank down the nuts on both my WB's until I was physically unable to do so and then I changed the ECC setting from scrub+correct to check only. Well, my computer is finally back to normal, but I did notice a 2 degree C increase (according to MBM) for idle.
So, I wanted to ask if these were good/average/bad numbers:
temps are max idle/load
ambient: 75 F ~= 24 C
case (from MBM) = 32 C/35 C
case (from cooking thermometer) = 27 C/31 C
CPU 1 (from MBM) = 42 C/47 C
CPU 2 (from MBM) = 41 C/47 C (this CPU is cooled first)
just curious! Thanks a bunch!
__________________
Pentium 4 3.06 GHz watercooled by Koolance EXOS
Gigabyte 8INXP mobo
512MB Corsair PC3200 DDR RAM
Fortron 400W PSU
Watercooled Radeon 9700 Pro
Quiet as a mouse!
Koolance Temps: 26C/32C
BIOS Temps: 36C/44C
==========================
Dual Athlon MP 2000+ watercooled
Black Ice Extreme, Eheim 1250 pump, 2 DTek TC-4 blocks, and homemade res
Gigabyte GA-7DPWDX mobo
512 MB Registered Mushkin DDR 2100 RAM
RAID 0: 2 IBM 60 GXP 60GB ea
RAID 5: 3 Western Digital Caviar 60GB ea
MSI GeForce4 4400
Sound Blaster Audigy MP3+
Yamaha CDRW-F1
Adaptec ATA RAID 2100 card
LOADS OF FANS!!!!
|