Quote:
Originally posted by bigben2k
One more thing... I found that using 3/4 inch ID tubing was a necessity with this pump. The pic (above) has 1/2 fittings, but I've since upgraded it all to 3/4.
The tee at the inlet is going to be relocated: it's meant for a drain valve. I have a PVC res, all built, just not mounted. Top fill hole, through the case.
|
Yikes! 3/4"
!! How did you come to decide that that tubing size was necessary? I was planning on doing some tests with the pump this weekend using 1/2" tubing to see how my flow rates would work with my waterblock. But man, 3/4" is huge!