Pro/Forums - View Single Post

Can O' Beans · 11-20-2002, 11:25 PM

I had good success on a test piece I made - tested under house water pressure.

I applied the goop, tightened the bolts down about 90%, let goop dry, then tightened the bolts down a tad more. Figured I'd use it's adhesive properties combined with a bit of pressure, like an O-ring or gasket.

11-20-2002, 11:25 PM	#7
Can O' Beans Cooling Savant Join Date: Aug 2002 Location: Pa - USA Posts: 264	I had good success on a test piece I made - tested under house water pressure. I applied the goop, tightened the bolts down about 90%, let goop dry, then tightened the bolts down a tad more. Figured I'd use it's adhesive properties combined with a bit of pressure, like an O-ring or gasket.