Pro/Forums - View Single Post

Hellion_Prime · 10-16-2001, 08:56 PM

Here are some shots of the newest version of my watercooler. I've put the pump, res tank, and rad in an old AT full tower I have and run lines to my KS188 using 3' lengths of hydraulic hose and 1/2" hydraulic quick connects. They have ball fittings on each end of the fitting, so they seal very tight, with a minimal ammount of fluid loss at dissconect. Here's the pictures. Let me know what y'all think.

--HP

10-16-2001, 08:56 PM	#1
Hellion_Prime Cooling Neophyte Join Date: Nov 2000 Location: Arlington, MA, US Posts: 90	Updated pics of my w/c setup Here are some shots of the newest version of my watercooler. I've put the pump, res tank, and rad in an old AT full tower I have and run lines to my KS188 using 3' lengths of hydraulic hose and 1/2" hydraulic quick connects. They have ball fittings on each end of the fitting, so they seal very tight, with a minimal ammount of fluid loss at dissconect. Here's the pictures. Let me know what y'all think. --HP __________________ That which does not kill me had BETTER do enough damage to keep me from firing back!