Pro/Forums - View Single Post

MadDogMe · 11-24-2002, 09:37 AM

What's your take on the best setup bigdog?, how would you go about working out the best block for the best rad for the best pump for the best tubing (assuming they are all 'best' for each other as well once joined as a system) without specific information that just is'nt available for anything except pumps?...

BillA has gone to alot of time and trouble to 'start' to give us the information we need to work this all out. short of going out and buying one or two of each and every worthwhile component, popping some amphet' and staying up for a few weeks it's going to take some more time yet...

Also given the amount of time and trouble BillAs gone to, I think the least we could do is go and look at what info is available, come to our own conclusion, then ask BillA for his take on it. don't forget he's a teacher at heart, not a walking encyclopedia. if you're prepared to work and learn for yourself (from what I've seen) BillA will help/steer you along in his own way. ask him for a short answer and you'll problly get a shorter reply than you bargained for

. I think he has no interest at all in helping people who are'nt prepared to help themselves, or at least try(asking nicely can help as well)...

we'd all like the short answer, but then knowledge is useless without understanding, and anyway where's the fun in cheating?

, you never prosper(or so it's said

)...

Failing that: Swiftech UH with 3/4' outlet 3/8'~1/2'inlet or OCPC Atlantis with same barbs, Iwaki MD20/30RZT, 3/4' hose all through. Serk rad or twin parrallel OCPC 'Abyss' rads with 3/4' barbs

...

11-24-2002, 09:37 AM	#25
MadDogMe Thermophile Join Date: Aug 2002 Location: Just shut up ;) ... Posts: 1,068	What's your take on the best setup bigdog?, how would you go about working out the best block for the best rad for the best pump for the best tubing (assuming they are all 'best' for each other as well once joined as a system) without specific information that just is'nt available for anything except pumps?... BillA has gone to alot of time and trouble to 'start' to give us the information we need to work this all out. short of going out and buying one or two of each and every worthwhile component, popping some amphet' and staying up for a few weeks it's going to take some more time yet... Also given the amount of time and trouble BillAs gone to, I think the least we could do is go and look at what info is available, come to our own conclusion, then ask BillA for his take on it. don't forget he's a teacher at heart, not a walking encyclopedia. if you're prepared to work and learn for yourself (from what I've seen) BillA will help/steer you along in his own way. ask him for a short answer and you'll problly get a shorter reply than you bargained for . I think he has no interest at all in helping people who are'nt prepared to help themselves, or at least try(asking nicely can help as well)... we'd all like the short answer, but then knowledge is useless without understanding, and anyway where's the fun in cheating? , you never prosper(or so it's said )... Failing that: Swiftech UH with 3/4' outlet 3/8'~1/2'inlet or OCPC Atlantis with same barbs, Iwaki MD20/30RZT, 3/4' hose all through. Serk rad or twin parrallel OCPC 'Abyss' rads with 3/4' barbs ...