Pro/Forums - View Single Post

Quickmcj · 11-26-2002, 01:21 PM

Hi there.

Again sorry for disturbing you tread about Nforce2/KT400.

Think it was you, that wanted to know my temps with my Aqua-computer setup right ?

Well...here goes:

1700+ Vcore 1.74 with Cuplex EVO,Eheim 1048, 2x120mm at low(1500RPM), Twinplex GF4 in the loop and a regular Airplex

idle: 28 degress

Burn(BurnK7 used): 35 degress

Water temp. before rad: 24,5 degress

Water temp. after rad: 24,0 degress

But I woudn't rely to much on the rad temps...they are mesuared with a probe, place directly on the hose.

The CPU temps are from the probe in the socket...not internal.

The rig is here:

The rig

(Press "næste" ind the bottom to move further)

11-26-2002, 01:21 PM	#1
Quickmcj Cooling Savant Join Date: Jun 2002 Location: Denmark Posts: 109	Gmat: Look here. Hi there. Again sorry for disturbing you tread about Nforce2/KT400. Think it was you, that wanted to know my temps with my Aqua-computer setup right ? Well...here goes: 1700+ Vcore 1.74 with Cuplex EVO,Eheim 1048, 2x120mm at low(1500RPM), Twinplex GF4 in the loop and a regular Airplex idle: 28 degress Burn(BurnK7 used): 35 degress Water temp. before rad: 24,5 degress Water temp. after rad: 24,0 degress But I woudn't rely to much on the rad temps...they are mesuared with a probe, place directly on the hose. The CPU temps are from the probe in the socket...not internal. The rig is here: The rig (Press "næste" ind the bottom to move further)