Pro/Forums - View Single Post

crane · 11-30-2002, 10:33 AM

Ok...just fired up the rig. Its 57 f or 13.8c outside this morning in the shop here. The thermistor I have epoxied under the chip reports temps at 23.7c and Sandra reports the chip at 24 c.
Thats a TBird 1.4 at 1.75 volts on a K7T266 Pro2 running stock FSB.
I lied earlier when I said I have 2 pumps on this rig.... I actually have 3. Right after the WB I have a Shurflo 2.8gpm diagphram pump inline too... its not running right now as it causes my 5/16th hose to flatten out.
Temp update : 1 magdrive running= 25.5c
2 magdrives running= 24.3c

Remember my ambient is a bit nipply right now at probably 60f, so that helps alot. I'll post back when it heats up to mid day.
IMHO, 2 pumps is neccesary in a restricted system like mine... my radiator is 3 inches thick with 20 passes and all my pumps are external with the required plumbing, probably 12 feet of tubing in all.

11-30-2002, 10:33 AM	#11
crane Cooling Neophyte Join Date: May 2002 Location: so cal Posts: 82	Ok...just fired up the rig. Its 57 f or 13.8c outside this morning in the shop here. The thermistor I have epoxied under the chip reports temps at 23.7c and Sandra reports the chip at 24 c. Thats a TBird 1.4 at 1.75 volts on a K7T266 Pro2 running stock FSB. I lied earlier when I said I have 2 pumps on this rig.... I actually have 3. Right after the WB I have a Shurflo 2.8gpm diagphram pump inline too... its not running right now as it causes my 5/16th hose to flatten out. Temp update : 1 magdrive running= 25.5c 2 magdrives running= 24.3c Remember my ambient is a bit nipply right now at probably 60f, so that helps alot. I'll post back when it heats up to mid day. IMHO, 2 pumps is neccesary in a restricted system like mine... my radiator is 3 inches thick with 20 passes and all my pumps are external with the required plumbing, probably 12 feet of tubing in all. __________________ dirt rules Last edited by crane; 12-01-2002 at 10:34 AM.