Pro/Forums - View Single Post

Ad B · 11-20-2001, 03:38 PM

By dipping a thermometer in my filling/air trap t fitting (which is the hottest water, after the waterblock and pump - before the radiator) it reads about 24-25c.

The heater core used to get warm before I put a shroud on for the fan, now it feels just about room temp.

I took the block off and reapplied the AS and screwed the nuts up as tight as they would go. No temp difference.

I'll flip the waterblock and see how it fairs, shame I have to drain the system to do so. ^_^;

Thanks

BTW, I clocked it down to 1.2G @ 1.94 (76 watts) and it keeps the proc at 34c load.

11-20-2001, 03:38 PM	#3
Ad B Cooling Neophyte Join Date: Nov 2001 Location: UK Posts: 3	By dipping a thermometer in my filling/air trap t fitting (which is the hottest water, after the waterblock and pump - before the radiator) it reads about 24-25c. The heater core used to get warm before I put a shroud on for the fan, now it feels just about room temp. I took the block off and reapplied the AS and screwed the nuts up as tight as they would go. No temp difference. I'll flip the waterblock and see how it fairs, shame I have to drain the system to do so. ^_^; Thanks BTW, I clocked it down to 1.2G @ 1.94 (76 watts) and it keeps the proc at 34c load.