View Single Post
Unread 12-03-2002, 10:45 AM   #3
myv65
Cooling Savant
 
Join Date: May 2002
Location: home
Posts: 365
Default

Having the reservoir at the highest point generally makes purging air easier, but is not a requirement. And by "inlet", Ben means the line returning water to the reservoir. A common problem people encounter is that the returning water will cause some level of turbulence in the reservoir. Often times this results in air being sucked into the line feeding the pump. An internal baffle that breaks up the incoming flow often proves helpful.
myv65 is offline   Reply With Quote