Quote:
Originally posted by Fixittt
Edit:
As mentioned above..... NEVER EVER EVER hold a peice of material in your hand and try to use an endmill in a drill pres to cut it. If you do, you desirve to loose a finger. Remember that the endmill is chewing thure metal, your flesh and bone will not stop it at all. Also when the cutter bites into the matirial there is alot of force behind it. Most of the time it will rip the material right out of your hands. And will probably take flesh with it. Please do not do this. If you must use a drill press to machine with, Then I highly recomend spening about $30 to get a small Vise with the X and Y slides build into it. I have one. Its is nothing persision or anything But it will hold the metal and has small crank wheels to move the vise.
Ok im done.
|
Fixittt is a man with lot's of experience...Pls. re-read his post, and get yourself a xy table...
