After doing some close looks at my system it seems to be running warm. Dunno why.
The CPU temps are 95/95 for both CPU's and the Chipset is at 110 Deg F.
I was hoping for much lower temps. I may have to go through and re-check my setup. its also getting warmer here in the cold North (WI). Its 60 Deg today, which by all measures is a heatwave. That means my apt temp goes up to about 75 Deg durring the day. (my apt is hot as hell.. dunno why.) Hmm.. Maybe time to get some Pelts. But I cant afford 30$ a piece right now, and I also need to score a 400+ watt PS for that, anyone know a place to buy one of them??
I do believe that this is cooler then what the chipset was running with one CPU in the system and air cooled. and by about 30 Deg F! so its prolly much better, but I would rather have it below 100Deg. maybe with my new cooler I can get that.
This coolign system is coolign much more now then it was before. I twas only cooling a Celery slug. Now it is cooling, 4 cache chips, 1 chipset, and 2 cpu cores. I know that if I kill the fan on my radiator setup she gets awful hot REAL fast. but with the fan running its cold to the touch. WIth the bleeder setup I made I can actually see the water level change as it gets hotter and colder. But you need to give ti a few days to get any air outta the lines before you can do any scientific reading off of it.
I am going to have the "Project DH - Cooling Tech" segment put up tonight.
C-ya then!
------------------
C-ya
Joe
|