Pro/Forums - View Single Post

Skulemate · 12-18-2002, 06:23 PM

Here's a quick question for the pelt guys here. Skee^ asked about running the block with the pelts off, and you told him that won't work since the pelt is an insulator when it's off. Here's the question I have: could you set a voltage for the pelt that would allow it to adequately move the heat through it while maintaining a low delta T (i.e. simulate an "off" condition with a much lower voltage than normal operation)?

12-18-2002, 06:23 PM	#9
Skulemate Cooling Savant Join Date: Jul 2002 Location: Toronto, Canada Posts: 381	Here's a quick question for the pelt guys here. Skee^ asked about running the block with the pelts off, and you told him that won't work since the pelt is an insulator when it's off. Here's the question I have: could you set a voltage for the pelt that would allow it to adequately move the heat through it while maintaining a low delta T (i.e. simulate an "off" condition with a much lower voltage than normal operation)? __________________ Michael E. Robbins M.A.Sc. Candidate, University of Toronto 12.1 GHz of AMD's finest (17.7 GHz total) crunching proudly for the AMDMB.com Killer Frogs SETI BOINC: Dual Opteron 246s (Iwill DK8N) \| XP2800+ (Shuttle SN41G2) \| 3x XP2400+ (ASUS A7N266-vm) SETI BOINC: 2x P4 2.8E (ASUS P4R800-vm) \| Crunching 24/7