JTrouma: My 1900+ is a AGOGA-9 (I think on the 9, maybe a Y), and runs at 1900 Mhz watercooled 24/7. The chipset fan is a Vantec Copper Iceberg, which tends to cool about 6-7 degs lower than a blorb, 2-3 degs lower than a cryorb.
Before you clock, flash to at least the 8RDA2C10.bin bios and install the new fan (lap the shiz out of it). You'll then have good luck. UNDERCLOCK WHEN FLASHING THE BIOS!
Also, don't use a GF4 unless you want to nuke it and bear in mind that some Crucial, Corsair DDR433, and Kingston memory still has a few issues with this board.
If none of this applies to you, happy clocking!
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|