Pro/Forums - View Single Post - Modified S370 Coolign block to fit BP6 (images inside)

Joe · 03-24-2000, 01:55 PM

When I tried to fit my prototype S370 block from Coolchip.com onto a BP6, it wouldnt fit. The hose connections hit the caps on either side.

I talked with Scott at Coochip and he said he is doing the same mod that I did by moving the hose connections to the top.

I did a few more small mods:
Changed the flow size to 3/8 instead of 1/4, added a new core in the center to better cool.

Here are the images:

The reason for the different plugs is cause the Ace hardware local to me doesnt have any of the nice flush ones. The square head ones may be a problem so I am going to shop tonight to find some of the flush ones.

Scott has told me they will be changed to work with the BP6 before they are sold to customers. so no worrys there!

------------------
C-ya
Joe

[This message has been edited by Joe (edited 03-24-2000).]

[This message has been edited by Joe (edited 03-24-2000).]

[This message has been edited by Joe (edited 03-24-2000).]

03-24-2000, 01:55 PM	#1
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Modified S370 Coolign block to fit BP6 (images inside) When I tried to fit my prototype S370 block from Coolchip.com onto a BP6, it wouldnt fit. The hose connections hit the caps on either side. I talked with Scott at Coochip and he said he is doing the same mod that I did by moving the hose connections to the top. I did a few more small mods: Changed the flow size to 3/8 instead of 1/4, added a new core in the center to better cool. Here are the images: The reason for the different plugs is cause the Ace hardware local to me doesnt have any of the nice flush ones. The square head ones may be a problem so I am going to shop tonight to find some of the flush ones. Scott has told me they will be changed to work with the BP6 before they are sold to customers. so no worrys there! ------------------ C-ya Joe [This message has been edited by Joe (edited 03-24-2000).] [This message has been edited by Joe (edited 03-24-2000).] [This message has been edited by Joe (edited 03-24-2000).]