[lukasz70]

for those that are to lazy to look

winrar site: http://www.rarlab.com/download.htm

just saw the picks, and man you must be lazy or something use your imagination, stick that HC inside somewhere. im putting my entire WC system into an enlight 7237 which is smaller, and my HC is a bit bigger then 8x6x2. granted, ALOT of holes were cut, and my Mother board will be moved back about a cm, but it will all fit if you want it to, ( the only thing im putting on the outside is the res, and thats b/c it a bit big. for your case. i've seen the HC mounted at the top of the case (inside) but it might go a bit into your top 5.25 bay and you need to cut holes in your top, of you can mount it on the side panel of your case, it looks like you have some room behind your smaller bays (floppy, hd... the 3.25bays), see if it will fit behind them and then just cut holes in that panel,

here is what i mean http://forums.procooling.com/vbb/sho...5&pagenumber=6

see how the fan intake is taken from both sides, you can do it just from one of the side, check the other page to see the rest

ps, love the fan shroud, but you will have to size it down if you want it to go into that case.