Pro/Forums - View Single Post

bigben2k · 12-24-2002, 09:03 AM

The inlet on that thing is actually right into the elbow (but I would have done it another way). Check out pHaestus' log for more pics. I'd put it either in the clear acrylic (if you're confident that you can seal it), or through the top.

If your max flow is ~200 L/h, that's roughly 50 gph, which is on the low end of an average rig. Start straightening things out!

Do you have specs on the pump? What size tubing is that?

12-24-2002, 09:03 AM	#21
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	The inlet on that thing is actually right into the elbow (but I would have done it another way). Check out pHaestus' log for more pics. I'd put it either in the clear acrylic (if you're confident that you can seal it), or through the top. If your max flow is ~200 L/h, that's roughly 50 gph, which is on the low end of an average rig. Start straightening things out! Do you have specs on the pump? What size tubing is that? __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 12-24-2002 at 11:44 AM.