Thats a great price, jtroutma, but I'm leaning more towards the Innovatives. They're a bit smaller, which'll work out better....I took a closer look at my system today, and there's verrrry little room by the GF4. Speaking of which, does anyone have a #s on these blocks? GF4 & NB, I mean.
LAST question about the pump: that maxi jet (the 295 gph one): would that be enough to power either:
a) an 3/8" TC-4, and Innovative 3/8" GF4 & NB, out of a bucket and into the case...maybe 1.5 ft of lift, and 10 ft hose, or through about 15 ft of copper tubing and then through 10ft hose OR
b) use Ts to split up: 1/2" for TC4, 3/8" for the rest. Same rad/res setup
Or should I look at a different pump with a bit more than 295GPH?
and LAST question SWEAR: it would really dimish the cooling powers to get the TC-4 in 3/8"? So I could just run it pucket/pump -> CPU -> GF4 -> NB -> bucket/pump. I understand more flow, etc, but it just seems simplier for a noob like me, if it didnt really cause a big cooling loss (like 5C+ hotter)?
Thank y'all so very much, I'm ordering as soon as I hear from you!!! TC4, Innovatives, usplastics.com tygon, and a soon to be decided pump!!!! Really, great apprechiated
