Pro/Forums - View Single Post

ap0calyps · 01-02-2003, 12:07 PM

Hey,

I ordered the heatercore from Danger Den, along with a reservoir. I'm thiking of this fan for my rad:

http://www.deltaww.com/products/dcfa...B120120762.pdf

Now, I cut a 120mm hole in the top of my tower. In the middle of the top, facing up. A blowhole I guess. I have 3x80mm in the front, 2x80mm in the back, and a 92mm in the back. I think I'm going to cut a 120mm hole in the bottom center of the tower, facing up, sucking air in from below the tower. THis should give me good airflow, correct?

Also, should I suck or blow air through the heatercore?

01-02-2003, 12:07 PM	#63
ap0calyps Cooling Neophyte Join Date: Dec 2002 Location: Ottawa, ON Posts: 30	Hey, I ordered the heatercore from Danger Den, along with a reservoir. I'm thiking of this fan for my rad: http://www.deltaww.com/products/dcfa...B120120762.pdf Now, I cut a 120mm hole in the top of my tower. In the middle of the top, facing up. A blowhole I guess. I have 3x80mm in the front, 2x80mm in the back, and a 92mm in the back. I think I'm going to cut a 120mm hole in the bottom center of the tower, facing up, sucking air in from below the tower. THis should give me good airflow, correct? Also, should I suck or blow air through the heatercore? __________________ XP 2400+ @ 2.3Ghz 1.95v Swiftech MC462/Vantec Tornado @7v Epox 8K3A+ 2X512MB PC2700@200Mhz CAS2 2.8v R9700Pro @ 425 core 730 mem 3Com 3c905ctx LAN Herc Fortissimo III (HATE Audigy) Adaptec 39320R SCSI RAID 3X 18.2GB Cheetah X15-36LP RAID0 Maxtor Atlas 10K III 73GB (storage) Asus 52X CDROM (burner's in server) Antec SX1200 tower Antec 550W TRUEPower SPU 5X 80mm Vantec Stealth fans