View Single Post
Unread 01-04-2003, 07:29 AM   #1
gmat
Thermophile
 
gmat's Avatar
 
Join Date: Mar 2001
Location: France
Posts: 1,221
Default A7N8X owners: important notes

First pay attention to what BIOS you get. Only 1001C and 1001E are reported to work well.
Next remove the NB heatsink as soon as possible. See that pink chewing gum ? It does *not* make contact with the chip !!! And that's confirmed by many A7N8X owners.
2 solution :
- lap the HS (it needs it badly) and apply thermal goop. Notice how the center of the chip is 'recessed'. Make sure that 100% of the surface makes contact with the HS bottom, through goop at worse. Yes that's about 0.1mm thick. If that gives you the chills you can lap the NB as well..
- replace it with a HSF or a waterblock.

Finally, with current BIOS the max reported speed is 195-196 sync on the FSB. 3DMark is not a good test. Try to launch a game such as Morrowind, UT2003 or Mechwarrior4 and play it. If after maybe 1h of gaming you've got no crash, then and only then it's stable.

With a watercooled NB and Corsair XMS3200 CAS2 my max freq is 196MHz sync. Not so bad, 4MHz short of 200, apart from benchmark addicts one will not notice any difference.
gmat is offline   Reply With Quote