01-04-2003, 03:43 PM
|
#18
|
|
c00ling p00n
Join Date: Jun 2002
Location: L.A.
Posts: 758
|
Quote:
Originally posted by Cathar
So with a US version of the Iwaki MD20-RZ this would translate to roughly 9.5lpm flow rate.
With an Iwaki MD20-R this would give roughly 9.0lpm.
With an Iwaki MD20-RX this would result in roughly 7.5lpm
|
So from this I can assume with my MD-15R I am getting roughly 8 - 8.5lpm? Cathar what were you getting with the 1250? Was it 6.5lpm? If indeed I did gain 1.5 - 2lpm with my switch to the MD-15R, I am a happy camper, plus, it only outputs 3 more watts 
__________________
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX
PC Power & Cooling Turbo 510 Deluxe
Mountain Mods U2-UFO Cube
Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
1,223,460+ Ghz Folding@Home
aNonForums
*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*'``'*:-.,_,.-:*
|
|
|