Pro/Forums - View Single Post

bigben2k · 01-09-2003, 01:11 PM

According to AMD CPU specs, the clearance between the pins should be 1.8mm, minus the pin, which is .43 to .50, leaving about 1.3 mm, aka 3/64". That would have to be the plastic tube's OD. (bigger than I tought!)

(calculated from AMD specs, for a 45 degree insertion)

01-09-2003, 01:11 PM	#4
bigben2k Responsible for 2% of all the posts here. Join Date: May 2002 Location: Texas, U.S.A. Posts: 8,302	According to AMD CPU specs, the clearance between the pins should be 1.8mm, minus the pin, which is .43 to .50, leaving about 1.3 mm, aka 3/64". That would have to be the plastic tube's OD. (bigger than I tought!) (calculated from AMD specs, for a 45 degree insertion) __________________ WBTA (Water Block Testing Alliance) Nordic Hardware WC 101 Last edited by bigben2k; 01-09-2003 at 01:35 PM.