Thanks for all the tips guys. Here is how it looks like now: All sides and bottoms will be 1/4" Poly. I am using 1" 90 degree elbows on all exterior adjacent sides (sides to bottom and sides to eachother). The case will sit on 1" 1/4" poly frames that will be held by these elbows as well. The top piece and the hatch door will be 1/8" Poly.
We have finished the model I think ( for now at least) : 
If you wanna check out some more renderings. check it out: http://www.thengc.net/images/waterco...exi-neg-press/ .
Thanks again for all the help,
Brian W
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).
Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.
Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
|