Pro/Forums - View Single Post

nikhsub1 · 01-28-2003, 10:28 AM

If you can, I would mount the pump at the top of the 5.25 cage if possible, that pump is going to put out some SERIOUS heat into the case... My little MD-15R gets very warm, I can only touch it for 5 seconds before it burns. Anyway, if you can get it at the top and then install a blow hole right above the pump you would have a very good solution. Don't fret, Iwakis do get hot to the touch and this is normal, however they do not transfer much (if any) heat to the water.

01-28-2003, 10:28 AM	#5
nikhsub1 c00ling p00n Join Date: Jun 2002 Location: L.A. Posts: 758	If you can, I would mount the pump at the top of the 5.25 cage if possible, that pump is going to put out some SERIOUS heat into the case... My little MD-15R gets very warm, I can only touch it for 5 seconds before it burns. Anyway, if you can get it at the top and then install a blow hole right above the pump you would have a very good solution. Don't fret, Iwakis do get hot to the touch and this is normal, however they do not transfer much (if any) heat to the water. __________________ :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: E6700 @ 3.65Ghz / P5W DH Deluxe / 2GB 667 TeamGroup / 1900XTX PC Power & Cooling Turbo 510 Deluxe Mountain Mods U2-UFO Cube Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res "Artificial intelligence is no match for natural stupidity." 1,223,460+ Ghz Folding@Home aNonForums :-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-:'``':-.,_,.-: