Pro/Forums - View Single Post

Icemanzero · 03-10-2001, 08:21 AM

It is cooled before the block, it goes like this: Alum. Tank w/Temp prob in it - to an inline pump - to a 4X4 plate Rad. with a 130CFM fan raised 1.5in off and ducted - to the DD maze copper block W/ 80W TEC in reverse to cool the water flowing through the block and an Alpha HS and HO fan to cool the hot side - then to the Swiftech waterblock on the CPU - then to another 4X4 plate Rad. with the same fan/ducted setup - then back to the Alum. tank. The in tank temps never rise 9 to 10 over room temp. Much better setup then I had before when my in tank temps were over 100F!

03-10-2001, 08:21 AM	#6
Icemanzero Cooling Neophyte Join Date: Jan 2001 Location: Dallas, TX USA Posts: 15	It is cooled before the block, it goes like this: Alum. Tank w/Temp prob in it - to an inline pump - to a 4X4 plate Rad. with a 130CFM fan raised 1.5in off and ducted - to the DD maze copper block W/ 80W TEC in reverse to cool the water flowing through the block and an Alpha HS and HO fan to cool the hot side - then to the Swiftech waterblock on the CPU - then to another 4X4 plate Rad. with the same fan/ducted setup - then back to the Alum. tank. The in tank temps never rise 9 to 10 over room temp. Much better setup then I had before when my in tank temps were over 100F!