Pro/Forums - View Single Post

TerraMex · 01-30-2003, 03:30 PM

I use the relay switch system, works like a charm. However i made two small changes .

The original relay diagram is connected directly to a molex plug from the psu, same here but, i added a override switch. And i'm adding a second override switch to the 220v side.

Bottom line is, i can cut the pump power (by flipping the switch and cutting the 12v) or i can override the relay (with the second switch) and maintain the pump operating even with the PC off. Its pretty simple to do.

01-30-2003, 03:30 PM	#8
TerraMex Cooling Savant Join Date: Nov 2002 Location: Portugal, Europe Posts: 870	Me too. I use the relay switch system, works like a charm. However i made two small changes . The original relay diagram is connected directly to a molex plug from the psu, same here but, i added a override switch. And i'm adding a second override switch to the 220v side. Bottom line is, i can cut the pump power (by flipping the switch and cutting the 12v) or i can override the relay (with the second switch) and maintain the pump operating even with the PC off. Its pretty simple to do. __________________ "we need more cowbell."