Pro/Forums - View Single Post - PC-35 case, 3 GHz and a BI Micro?

jtroutma · 02-03-2003, 02:06 PM

Well, here is something that MIGHT work. BI micro with a Vantect Tornado 92mm w/ 92mm -> 80mm shroud. That way you could also setup a potenometer to the tornado to control the noise a bit more. That might work but requires some head room.

Otherwise, a BI micro w/ an 80mm tornado with a voltage dial. I am looking into building a cooling system very similar into a Shuttle SN41G2 and I think that it will work.

BTW dont expect stellar temps with that setup but should be better than what you have there.

02-03-2003, 02:06 PM	#2
jtroutma Cooling Savant Join Date: Aug 2001 Location: SLO, CA Posts: 837	Well, here is something that MIGHT work. BI micro with a Vantect Tornado 92mm w/ 92mm -> 80mm shroud. That way you could also setup a potenometer to the tornado to control the noise a bit more. That might work but requires some head room. Otherwise, a BI micro w/ an 80mm tornado with a voltage dial. I am looking into building a cooling system very similar into a Shuttle SN41G2 and I think that it will work. BTW dont expect stellar temps with that setup but should be better than what you have there. __________________ Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10) OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings) DFI LANParty nForce4 Ultra-D SCSI Raid 5 x (3) Cheetah 15K HDDs LSI Express 500 (128MB cache) OCZ PowerStream 520W PSU ATI X850XT PE (Stock) DTEK WhiteWater + DTEK Custom Radiator Eheim 1250