Did you try the heatercore database? It is the top link in this forum (stickied).
Go to that page and type in the following settings:
L: Min, 9.5/Max, 11
W: Min, 4.5/Max, 7
D: Min, 0/Max, 2
You'll get a ton of responses, all of which can house two 120mm fans side by side. Most of those have 5/8" or 3/4" tubing, which isn't a bad thing. It is easy to convert 5/8" to 1/2", especially if you are using tygon or clearflex tubing. All you need is a reducer. Plus, since many pumps either input or output 5/8" (while the other side is 1/2"), it would only require reduction on one side. As far as depth, they range from a hair under 1" to as thick as 2", so there is a ton of variety to work with.
Pictures are linked to all of the results that you get from the database query.
Good luck, man.
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|