Problem one: mixing copper and aluminum. This is a good primer for Joe Sixpack in galvanic corrosion.
Problem two: an aluminum base. Right there, it is going to be nearly impossible for it to perform better than a normal copper aircooler. Why the extra weight?
Problem three: Low volume of coolant. That stuff is going to get very hot very quick, and because of --
Problem four: a miniscule radiator and 60mm fan (what the loud howler monkey fsck were they thinking?) will not be able to adequately cool the coolant.
Problem five: You're wasting power and allowing a submerged pump to further heat the coolant that is contained ON the die.
Therefore: The coolant will get very fscking hot, and in the end will serve to keep the CPU temp higher than a mediocre copper HSF could (and the HSF would probably be quieter). Is it any wonder that most every normal HSF in that review did better than that piece of crap?
If this had a documentary made about it, it would be titled "When Retards Strike" or "Emeril Meets AMD!" or "Who Wants To Be A Fscktard?".
__________________
#!/bin/sh {who;} {last;} {pause;} {grep;} {touch;} {unzip;} mount /dev/girl -t {wet;} {fsck;} {fsck;} {fsck;} {fsck;} echo yes yes yes {yes;} umount {/dev/girl;zip;} rm -rf {wet.spot;} {sleep;} finger: permission denied
|