OK guys...you have convinsed me..!!!!
As the topic says....I have been convinced to sell my BIX:es and buy a HeatCore.
I have a question though.
I was planning to use 2xEheim 1048 for my WC...using 2xBIX.
How about using those 2 1048:s with 1 HC....is it to much...or can the HC take it..??
And also where would you suggest me install the pump/pums...??...befor or after the rad..or mabye and before and one after..??
WC:
PSU: S-320-12 for the cpu block and my regular TruePower 550w for gpu and rest of my system
Cpu: Swiftech MCW478 UHT 226w TEC
Gpu: Swiftech MCW 50 T 80w TEC
Rad: HeatCore 6 1/8" x 7 3/8" x 2"
Pump: Eheim
I have a P4 2.4b and my plan is to run it above 3ghz. If I´m not totally wrong it will produce aproximatly 92.3 watts of heat @ 3014mhz and 1.7vcore.
Ambient temp will bee about 20C´
__________________
||Naughty||
Windows XP
Ilyama 19"
P4 2.4b @ 3014ghz
Abit IT7 MAX
512mb TwinMos PC3200@222mhz
Radeon 9700 Pro
SoundBlaster Audigy
3Com TX 10/100
220gb hdd
|