View Single Post
Unread 02-12-2003, 08:01 PM   #16
BrianW
Cooling Savant
 
BrianW's Avatar
 
Join Date: Jun 2001
Location: Desert City in California
Posts: 631
Default

Thanks for the responses... The reason I went with 92mm is because of the space requirement, although that is not written in stone.

I will no longer be using a watercooled psu. I found one that is more than quiet enough for me. In light of this, I could still run them in series right? The NB will be the last component, so it should be cooled suffeciently by the slightly warmed water right?

As far as quick disconnects goes, this case has to be mobile. I need to take it apart and reassemble it w/o any water @ hand. I go to LAN parties, and this case has to go with me( I am a show off). I also want nothing protruding out of the back or otherwise. Are there any quick disconnects that offer a higher flow?

Thanks again,

Brian W
__________________
Water Cooled Inwin Q500 (Dual Rads: Rad1 = DTEK Pro Core | Rad2 = Blick Ice Estreme, Hydor L30, Dangerden Maze2, Bay Res Typhoon Reservoir, 1/2 " DD Tygon Thick Wall Hose).

Flow: Res, Pump, CPU watervlock, Y into both rads, both rads into res independently.

Athlon XP 1800+ (@ 1731 - 150mhz fsb.), on a Asus A7N266-c, and a Radeon 9000 *waiting for RMA'd Saphire 9800 ultra from Newegg)
BrianW is offline   Reply With Quote