Quote:
Originally posted by zoson
@jaydee116: how much area on top do I need? I did that drawing freehand, so it is not quite to scale. The channels should have 2mm of free space at the closest point to the edge of the block. I'm planning on using a soldered on copper top, but if this also becomes impossible I can always make the block larger and add an o-ring, and also use the mounting holes around the socket. Currently I'm planning to use a clip.
-Zoson
|
You can attemp tp solder it, but chances are there will be ALOT of solder dumped into the channel with that thin of sealing area. Give yourself at least 3.175mm or 1//8". Last thing to skimp on is the sealing!
