Pro/Forums - View Single Post

zoson · 02-16-2003, 07:45 PM

I'm not sure what you guys are talking about saying the VA is loud... I have two of them here. One does rattle, but that is because I chipped one of the impeller blades, which is why I replaced it. Prior to chipping it, the pump was completely silent. It is also my experience that VA's are quieter and transfer less vibrations to your case because it comes with some nice rubber suction cups for feet.
As far as interference from the VA and monitors, as long as you have the coolant intake barb perpendicular to the side of your monitor you will have no problems.
-Zoson

02-16-2003, 07:45 PM	#8
zoson Cooling Savant Join Date: Nov 2001 Location: X Posts: 204	I'm not sure what you guys are talking about saying the VA is loud... I have two of them here. One does rattle, but that is because I chipped one of the impeller blades, which is why I replaced it. Prior to chipping it, the pump was completely silent. It is also my experience that VA's are quieter and transfer less vibrations to your case because it comes with some nice rubber suction cups for feet. As far as interference from the VA and monitors, as long as you have the coolant intake barb perpendicular to the side of your monitor you will have no problems. -Zoson __________________ Core i7 930 @ 4254Hz 22x193 \| ASUS R3E 901 BIOS \| 12GB Mushkin Blackline 3x4GB @ 1547MHz 7-8-7-24-1N \| Lian Li PC-A10B 2x EVGA GTX275 SLI @ 720/1266/1566 \| 2x 80GB Intel X25-M G2 SSD Raid 0 \| 3x 1TB Samsung Spinpoint 7.2K Raid 5 \| Corsair 950TX H2O \| Enzotech Sapphire Rev.A \| EK-FB RE3 \| Swiftech - 2x MCW60/GTX275 Unisink, MCP655b, MCRes Micro.v2 \| 3x HWLabs SR1-120 あなたの神への弓 Time isn't wasted, when you're gettin' wasted.