Well, here it is, my latest and LAST "by hand" DYI-block! Why, haha, cause the GODS have blessed me with a NEW DRILL PRESS!!!! It's not the best, certainly not the worst, but it works good and seems of solid construction. I wish I had a digi-cam for pics, It's a "Cummins Pro" 8" table top press, 5 spd (750-3150rpm) ~1/2hp motor etc. Anyhow, the pic is of my block that I just made on the fly, didn't really draw to much up, just let my mind wonder. The MS-Paint does it no justice, (wish I could afford A-CAD!) The temps I'm getting are pretty good, about ~.12-13 C/W (idle) 35C-24C_amb/85.323W = .13C/W...
Right now I'm running an XP1600+@1813/1.79Vcore (181*10), welp that about does it! Now I just need to get some copper stock to start making drill press blocks!
BTW- Where does everyone get their caps (plates?) for your blocks?
THANK THE GODS FOR MY DRILL PRESS... Now if only they'd bless me with a SMALL X-Y table! THANK YOU!!!!!
__________________
XP 1600+ AGOIA-Y (GreenLabel, UNLOCKED!@/ NF7-S 2.0/ PC 2700 DDR
10.5*172FSB(1806/ 1991 high), Vcore 1.792...@84.95Watts
--86' Chevette Heater Core
--1/2" Vinyl tubes
--Via1300-Stealth Mod(QUIET!)
---Home made copper-tube block
---PVC small internal res